•The manual lathe that is also a CNC...
•Cuts and performs like a CNC...
•But is priced thousands less than Full CNC lathes.
The Summit® SmartCut II is a new series of combination flatbed lathes available from Summit. The SmartCut CNC lathe is everything you would expect, rugged and dependable, with the precision needed for the finest finishes. It combines CNC controls with hand wheels for manual turning providing maximum convenience and economy.
SmartCut II incorporates a self-teaching controller. You can produce a part manually, and with a few simple key strokes the controller stores the machining sequences and creates a part program. At a later time, retrieve the program, enter the number of parts to be produced, and SmartCut II does the rest.
SmartCut II was designed for growing companies evolving from manual lathe operations to a CNC lathe. The control language is conversational with on screen menus and prompts to make programming virtually foolproof. The controls are also equipped with multiple ports for connection to off line programming systems for more advanced users. The combination of these control features and hand wheels enable you to use a single machine for one-off or prototype production; in a semi-automatic mode for small production lots; and in its fully automatic mode for medium length production runs.
The combination of CNC technology and manual capability, in a well made heavy weight design, make the Summit SmartCut II the new value leader in turning.
Available in 40" - 160" center distances with up to 11,000 lbs. part capacity.
Key Features:
- Heavily ribbed cast bed and base
- Hardened and precision ground bed ways
- Precision ground ball screws
- Infinitely variable speed ranges
- Yaskawa spindle drive
- Constant surface speed
- Fine feed electronic hand wheels
- Inch-metric capabilities
- T-slotted cross slide for mutiple accessory compatibility
|
Included Accessories:
- Steady rest with roller tips
- Follow rest
- Coolant system
- Work light
- Sliding enclosure doors
- 3 jaw chuck (except SC32)
- Front and rear 4 jaw chucks (SC32)
|
| Specifications: |
SC20 |
SC24 |
SC28 |
SC30 |
SC32 |
| Capacities |
|
| Swing over bed |
20" |
24" |
28" |
30" |
31.5" |
| Swing over slide |
11.5" |
16" |
20" |
22" |
20" |
| Swing over gap |
28" |
31" |
35" |
37" |
43.3" |
| Headstock |
|
| Hole thru spindle |
3.312" |
4 1/8" |
6.1" |
9.8" |
12" |
14.9" |
| Spindle Speeds (no.) Range |
(inf variable)
30-2000 RPM
|
(infinitely variable)
22-1500 RPM
|
(inf variable)
22-1000 RPM
|
(inf variable)
4-600 RPM
|
(inf variable)
4-400 RPM
|
| Spindle Nose |
D1-8 |
D1-11 |
A2-11 |
A2-15 |
A2-20 |
| Feed Rate |
|
| X Axis |
0-250 RPM |
| Z Axis |
0 - 400 IPM |
| Tailstock |
|
| Tailstock - quill diameter |
3" |
3" |
4.1" |
| Tailstock - quill travel |
6.25" |
8.8" |
10.8" |
| Motors |
|
| Z Axis Servo |
1.4 HP |
2.7 HP |
4 HP |
| X Axis Servo |
1.4 HP |
1.4 HP |
2.7 HP |
| Spindle Motor HP |
15 HP |
20 HP |
30 HP |
