The rugged Summit® EVS-series vertical mills have been engineered and manufactured from the finest components with the operator in mind. All the controls are centralized for ease of operation in either hand or power feed mode. Movement of the head to various angles is easily obtained from the operators position. The heavy one piece base and column is a thick walled Meehanite casting that is fully cross-ribbed for strength and rigidity. The built in coolant tank is another added value feature of the heavy duty base and column.
Key Features and Accessories:
- Inverter Duty, High Energy - High Efficiency Motors for lower utility costs, save up to 35%
- Fewer moving parts in the head for less maintenance and down time
- Cogged drive belt to prevent belt slippage and extend tool life
- Centrally located controls for ease of operation
- Immediate response speed control (0-full speed in 4 sec.)
- Full range RPM selection. Tweak up or down to prevent chatter and prolong tool life
- Electronic inverter controlled braking for reduced set-up time
- Turcite-B" inserted guideways for extended machine life
- Complete electrics with low voltage controls for safer machine operation
|
- Yaskawa compact AC inverter drive
- Fan cooled electrical enclosure
- Heavy "Meehanite" cast iron construction for excellent damping
- Huge box ways on knee (EVS-350B & EVS-550)
- Built in coolant system
- Power raise on knee (EVS 550B)
- Power draw bar (EVS 550B)
- One shot lubrication
- R-8 collet set (EVS-349B & EVS-350B)
- Halogen work light
- Draw bar
- Clamping kit
- Way covers
- Service wrenches & tool box
- Operation & parts manual
|
| Specifications: |
EVS-349B |
EVS-350B |
EVS-550B |
| Motor size (2 speeds) |
3 HP |
3 HP |
5 HP |
| Spindle speeds - number |
Inf. variable |
Inf. variable |
Inf. variable |
| Spindle speeds - range (RPM) |
0-4300 |
0-4300 |
0-3650 |
| Spindle taper |
R-8 |
R-8 |
#40 |
| Spindle travel |
5" |
5" |
5.5" |
| Spindle feed range |
.0015/.003/.006 ipr |
.0015/.003/.006 ipr |
.0015/.003/.006 ipr |
| Head movement side to side |
+/- 90° |
+/- 90° |
+/- 90° |
| Head movement front to back |
+/- 45° |
+/- 45° |
N/A |
| Table size (WxLxH) |
9"x49"x3-1/8" |
10"x50"x3-1/8" |
11"x52"x3-1/8" |
| Table feed (longitudinal) |
31" |
36" |
32 1/2" |
| Table feed (cross) |
13" |
16" |
16" |
| Maximum weight of work piece |
850 lbs. |
850 lbs. |
850 lbs. |
| Rotation of over arm |
360° |
360° |
360° |
| Over arm adjustment |
15" |
22" |
24" |
| Spindle nose to table |
0" - 17-1/2" |
2-1/2" - 17-1/2" |
2" - 22" |
| Weight |
2,200 lbs. |
2,900 lbs. |
3,740 lbs. |
You Might Also Like
This product has no related products.
|
